Nortel Networks NN43001-106 - Manual (Page 84)

84 10/20 Digit ANI on 911 Calls
Feature implementation
Task summary list
The following is a summary of the tasks in this section:
1. "LD 15 – Set the Pseudo Automatic Number Identification (PANI) prompt
to YES to display PANI." (page 84)
2. "LD 16 – Configure the M911 ANI format." (page 84)
LD 15 - Set the Pseudo Automatic Number Identification (PANI) prompt to YES to display PANI.
Prompt Response Description
REQ: CHG Change existing data.
TYPE: ANI Change Automatic Number Identification options.
CUST Customer number
0-99 Range for Large System and CS 1000E system.
0-31 Range for Small System, Media Gateway 1000B, and Media
Gateway 1000T.
.... ....
PANI
YES
(NO) Display.
Do not display Pseudo Automatic Number Identification
(default).
Note: When PANI is set to NO (Do not display PANI), the PANI
will display briefly, then disappear.
.... ....
LD 16 - Configure the M911 ANI format.
Prompt Response Description
REQ CHG Change existing data.
TYPE RDB Route data block.
CUST xx Customer number, as defined in LD 15
ROUT Route number
0-511 Range for Large System and CS 1000E system.
0-127 Range for Small System, Media Gateway 1000B, and Media
Gateway 1000T.
DES x...x Designator field for trunk (0-16 character alphanumeric).
TKTP DID Direct Inward Dialing trunk data block.
Nortel Communication Server 1000
Features and Services - Book 1 of 6 (A to B)
NN43001-106 01.04 Standard
Release 5.0 27 July 2007
Copyright © 2007, Nortel Networks
.