Nortel Networks NN43001-106 - Manual (Page 534)

534 Backup and restore
Command Description
N of versions = (1)-10 number of incremental backup data versions
preserved on the local removable media device
name = rule name - text without white spaces, up to 30 characters
The <name> parameter is also added as optional when defining a new backup rule with SCS type
(introduced in CS 1000 Release 4.5 Geographic Redundancy).
Backup to SCS (SCS backup rule)
During a backup operation, the backup data files are grouped into one file
using the tar utility, compressed using the gzip utility, and copied to the FMD
(CP PIV) or MMDU hard drive (CP PII).
During a restore operation, the specified version of the backup data file is
copied from the FMD (CP PIV) or MMDU hard drive (CP PII), de-grouped
using the tar utility, and decompressed using the gzip utility
LD 117 - Ethernet and Alarm Management
Command Description
NEW BKPR xxx aaa b...b
yy Add a new Backup Rule, where:
• xxx = Backup Rule number ID = 1-100.
• aaa = rule type = SCS. Currently, this is the only rule type that
exists: it allows direct replication to another system.
• b...b = ELAN network interface IP address of the destination
system.
• yy = the number of database versions to save on the destination
system = (2)-10.
CHG BKPR xxx aaa b...b
yy Change a Backup Rule, where:
• xxx = Backup Rule number ID = 1-100.
• aaa = rule type = SCS. Currently, this is the only rule type that
exists: it allows direct replication to another system.
• b...b = ELAN network interface IP address of the destination
system.
• yy = the number of database versions to save on the destination
system = (2)-10.
Nortel Communication Server 1000
Features and Services - Book 1 of 6 (A to B)
NN43001-106 01.04 Standard
Release 5.0 27 July 2007
Copyright © 2007, Nortel Networks
.