Nortel Networks NN43001-106 - Manual (Page 402)

402 Automatic Hold
line MADN. With the Release option disabled, the active call on the single
line MADN is put on hold. With the Release option enabled, the active call
on the single line MADN is dropped.
Lamp Status
The LED lamp status indications of calls put on automatic hold are identical
to those for calls that are put on hold using the Hold key.
Last Number Redial (LNR)
A set with Last Number Redial Allowed (LNA) Class of Service can put an
active call on hold by pressing another idle DN key and still activate the Last
Number Redial feature to make an outgoing call. Automatic Hold does not
override this feature.
Music on Hold
Music on Hold can be applied to calls put on automatic hold.
No Hold Conference
The Automatic Hold feature does not apply in the case of a No Hold
Conference call. Automatic Hold does not override the No Hold Conference
feature.
Voice Call
If a user presses the Voice Call key while a call is established on the key,
the call is placed on hold. If the Voice Call key is pressed while a call is
established on another DN, the established call is put on hold.
Feature packaging
This feature is included in base system software.
Feature implementation
LD 11 - Allow or deny the Automatic Hold Class of Service for proprietary sets.
Prompt Response Description
REQ: NEW
CHG Add new data.
Change existing data.
TYPE: a...a Telephone type. Type ? for a list of possible responses.
TN
l s c u
Terminal Number
Format for Large System and CS 1000E system,
where l = loop, s = shelf, c = card, u = unit.
c u Format for Small System and Media Gateway 1000B
where c = card and u = unit.
CUST xx Customer number, as defined in LD 15.
Nortel Communication Server 1000
Features and Services - Book 1 of 6 (A to B)
NN43001-106 01.04 Standard
Release 5.0 27 July 2007
Copyright © 2007, Nortel Networks
.