Nortel Networks NN43001-106 - Manual (Page 474)

474 Automatic Wake Up
In each scenario, the Wake Up indicator lights and the display clears, except
when the wake up time is aborted and no wake up time was programmed
before the abort. In this case, the Wake Up indicator stays off. If a time
was programmed before aborting, the previous wake up time is restored,
and the indicator is on.
From an attendant console
To program a wake up call from an attendant console, follow these steps:
Step Action
1 Press A. Wake Up.
The A. Wake Up, ICI, lpk, and S indicators light.
ATTENTION
If the displayed number is not the number requiring the wake up call, dial the
proper number.
2 Press the octothorpe (#).
If the A. Wake Up indicator remains on steadily, the dialed number
is valid. If it flashes, the number is invalid.
3 Dial the requested wake up time using a 24-hour format. Press A.
Wake Up again.
If the A. Wake Up indicator remains on without flashing, the
requested wake up time is acceptable; if it flashes, the time is not
acceptable. Enter the new time; if it is acceptable, the indicator goes
on without flashing.
4 Press Rls to end the procedure.
—End—
To cancel a wake up call from an attendant console, follow these steps:
Step Action
1 Press A. Wake Up.
The A. Wake Up indicator lights.
If the displayed number is not the number requiring cancellation of
the wake up call, dial the proper number.
2 Press the octothorpe (#), then press A. Wake Up again.
The A. Wake Up indicator goes off and the wake up request is
canceled.
Nortel Communication Server 1000
Features and Services - Book 1 of 6 (A to B)
NN43001-106 01.04 Standard
Release 5.0 27 July 2007
Copyright © 2007, Nortel Networks
.