Nortel Networks NN43001-106 - Manual (Page 437)

Feature interactions 437
Calling Party Privacy
The calling party and called party have the same Calling Party Privacy
considerations.
Digit Display
Dialed numbers are displayed when the ARDL feature is activated. The
calling party can dial digits even though a busy tone indication is given.
Digits dialed while on hold are not displayed. When the calling party accepts
a redialed call, the dialed numbers are displayed. If the Display (DSP) key
and appropriate RGA key are pressed while a call is on hold, the number
redialed is displayed.
Directory Number - Multiple Appearance
An ARDL call from a Single Call Ringing (SCR) or Single Call Non Ringing
(SCN) is only redialed when all telephones that have the same DN are free.
An ARDL call from a Multiple Call Ringing (MCR) or Multiple Call Non
Ringing (MCN) is only redialed when the originating key is free.
Enhanced Hot Line
An ARDL call can be activated from an Enhanced Hot Line key. However,
the call is only redialed when the calling party’s HOT key is free.
Last Number Redial
An ARDL call can be activated on a number dialed using the Last Number
Redial (LNK) key or by pressing the DN key twice. The ARDL number is
saved as the last number redialed.
Line Load Control
ARDL attempts are controlled and restricted by Line Load Control.
Network Alternate Route Selection
Network Speed Call
ARDL can be activated on a Network Alternate Route Selection DN or
Network Speed Call.
New Flexible Code Restriction
ARDL calls must pass New Flexible Code Restriction (NFCR) checks. If the
redialed number is restricted, the ARDL request is cancelled.
Override
An ARDL call cannot be overridden. This is done to avoid creating a
conference when a tone detector is involved.
Nortel Communication Server 1000
Features and Services - Book 1 of 6 (A to B)
NN43001-106 01.04 Standard
Release 5.0 27 July 2007
Copyright © 2007, Nortel Networks
.