Nortel Networks NN43001-106 - Manual (Page 498)

498 B34 Codec Static Loss Plan Downloading
Prompt Response Description
T2WV Rx Tx TIE, 2 wire, Class of Service VNL. The same definition
applies as for COTS.
T4WT Rx Tx TIE, 4 wire, Class of Service TRC. The same definition
applies as for COTS.
T4WN Rx Tx TIE, 4 wire, Class of Service TRC. The same definition
applies as for COTS.
T4WV Rx Tx TIE, 4 wire, Class of Service VNL. The same definition
applies as for COTS.
PAGT Tx TIE, E&M 2 paging trunk. The same definition for Tx
applies as for COTS. Note that there is no loss value
associated with this trunk type in the receive (Rx) direction.
RANR Rx Recorded Announcement Route. The same definition
for Rx applies as for COTS. Note that there is no loss
value associated with this trunk type in the transmit (Tx)
direction. Enter the Coded Receive (A/D) Input/Output
level, where Rx = 8-39.
ALUS Rx Tx ALC unit short line (SHL) Class of Service. Enter the
coded input/output relative levels in the receive (Rx)
direction and in the transmit (Tx) direction, for this
port type. The input range of Rx and Tx for port types
associated with analog lines is 0-31 and 8-39 respectively.
ALUL Rx Tx ALC unit long line (LOL) Class of Service. Enter the coded
input/output relative levels in the receive (Rx) direction
and in the transmit (Tx) direction, for this port type. The
input range of Rx and Tx for port types associated with
analog lines is 0-31 and 8-39 respectively.
Feature operation
No specific operating procedures are required to use this feature.
Nortel Communication Server 1000
Features and Services - Book 1 of 6 (A to B)
NN43001-106 01.04 Standard
Release 5.0 27 July 2007
Copyright © 2007, Nortel Networks
.