Nortel Networks NN43001-106 - Manual (Page 409)

409
Automatic Number Identification
Contents
This section contains information on the following topics:
"Feature description" (page 409)
"Operating parameters" (page 419)
"Feature interactions" (page 420)
"Feature packaging" (page 424)
"Feature implementation" (page 425)
"Feature operation" (page 427)
Feature description
The Automatic Number Identification (ANI) feature automatically identifies
a station originating an outgoing toll call and its destination party and
transmits the information to a recording office.
A system with ANI sends information about stations involved in an outgoing
toll call, using Multifrequency (MF) signaling, over Central Automatic
Message Accounting (CAMA) trunks to toll-switching CAMA, Traffic Operator
Position System (TOPS) or Traffic Service Position System (TSPS) offices.
The software portion of ANI performs the following functions:
• identifies an originating outgoing toll call
• determines the calling station identification, and controls the signaling
and supervision of the ANI trunk circuit
• connects the MF sender and the ANI trunk circuit
• loads up to 16 digits that are to be MF outpulsed over the ANI trunk
into the MF sender
• orders initiation of the outpulsing
Nortel Communication Server 1000
Features and Services - Book 1 of 6 (A to B)
NN43001-106 01.04 Standard
Release 5.0 27 July 2007
Copyright © 2007, Nortel Networks
.