Texas Instruments TMS320C64x DSP - Manual (Page 273)

VIC Port Registers
VCXO Interpolated Control Port 6-6 SPRU629
6.5.1 VIC Control Register (VICCTL)
The VIC control register (VICCTL) is shown in Figure 6–3 and described in
Table 6–4.
Figure 6–3. VIC Control Register (VICCTL)
31 16
Reserved
R-0
15 4 3 1 0
Reserved PRECISION GO
R-0 R/W-0 R/W-0
Legend: R = Read only; R/W = Read/Write; -n = value after reset
Table 6–4. VIC Control Register (VICCTL) Field Descriptions
Bit field † symval † Value Description
31–4 Reserved – 0 Reserved. The reserved bit location is always read as 0. A
value written to this field has no effect.
3–1 PRECISION 0–7h Precision bits determine the resolution of the interpolation. The
PRECISION bits can only be written when the GO bit is cleared
to 0. If the GO bit is set to 1, a write to the PRECISION bits
does not change the bits.
16BITS 0 16 bits
15BITS 1 15 bits
14BITS 2h 14 bits
13BITS 3h 13 bits
12BITS 4h 12 bits
11BITS 5h 11 bits
10BITS 6h 10 bits
9BITS 7h 9 bits
† For CSL implementation, use the notation VIC_VICCTL_field_symval