Figure 2-3 – Xilinx LOGICORE UG144 User Manual

Page 24

Advertising
background image

24

www.xilinx.com

1-Gigabit Ethernet MAC v8.5 User Guide

UG144 April 24, 2009

Chapter 2: Core Architecture

R

-- DISCONTINUED PRODUCT --

GMAC Core Without Management Interface and With Address Filter

Figure 2-3

shows the pinout for the GEMAC core when the optional Management Interface

is omitted and the optional Address Filter is included in the core.

The configuration_vector[67:0] input provides the method for configuration of
the core, and mac_unicast_address[47:0] input provides the method of setting the
unicast address used by the Address Filter.

Figure 2-3:

Component Pinout for MAC without Optional Management Interface

and with Optional Address Filter

gmii_rx_clk

gmii_rxd[7:0]

gmii_txd[7:0]

gmii_tx_en

gmii_tx_er

reset

gmii_rx_dv

gmii_rx_er

gtx_clk domain

gmii_rx_clk domain

Client Side Interface

Physical Side Interface (GMII)

configuration_vector[67:0]

gtx_clk

tx_data[7:0]

tx_ack

tx_underrun

pause_req

pause_val[15:0]

tx_data_valid

tx_ifg_delay[7:0]

tx_statistics_vector[31:0]

tx_statistics_valid

rx_data[7:0]

rx_good_frame

rx_bad_frame

rx_data_valid

rx_statistics_vector[27:0]

rx_statistics_valid

mac_unicast_address[47:0]

Advertising