Printronix SL_T5R Energy Star - Manual (Page 148)

148
Chapter 3 PRINTER CONTROL
Batch Counter
Displays the number of pages remaining in a print job.
• Disable (factory default). The # Pages remaining to be printed will not
display. Instead, the Active emulation and interface will display on the
second line of the control panel LCD.
• Enable . The # Pages remaining to be printed will display on the second
line of the control panel LCD. This feature is supported in PGL and ZGL
only. The PGL Execute command and parameters that support this
feature is ~EXECUTE;formname;[;FC][;ICNTn][;FCNTn].
The ZGL Execute command is ^PQ(#Pages).
NOTE: If the correct execute command is absent from the print file, “0 Pages”
will continually display on the control panel LCD.
Feed Key Online
This option changes the functionality of the Feed key when the printer is
online.
• Feed (factory default). When selected, pressing the Feed key causes the
printer to feed a form.
• Reprint Last . When selected, pressing the Feed key causes the printer
to reprint the last printed form.
Admin User
• Disable (factory default). When disabled this function does not permit
access to submenus which would not normally be changed by a typical
user.
• Enable . When enabled, this function permits access to submenus which
would not normally be changed by a typical user.