Printronix SL_T5R Energy Star - Manual (Page 77)

Auto Save Configuration
77
4. When the desired number displays, press the
↵ key to select it. The
following message displays briefly:
When processing is completed, the display shows:
NOTE: If the configuration number has been previously saved and Protect
Configs. = Enabled under CONFIG CONTROL, the following error
message displays:
If the above occurs, see “Modifying a Saved Configuration” on page 79,
step 4.
5. Print your configuration and store it in a safe place for future reference.
Refer to “Printing a Configuration” on page 81.
Auto Save Configuration
If you make any changes to the current configuration menu items, you will be
prompted to save the changes to “Config #” when you place the printer online.
“#” equals the next available unassigned configuration number. When
prompted, press one of the following keys:
• Enter . Saves to Config 1 or the next available Config, and becomes the
Power-Up config.
NOTE: If all eight Configs are assigned, you will be prompted to select which
Config to overwrite.
• Pause . Changes will be implemented but saved only temporarily until
deliberately saved as a new configuration or until you power off the
printer. All changes will be lost when you power off the printer.
Saving
Configuration
Save Config.
X *
CONFIG. EXISTS
Delete First