Printronix SL_T5R Energy Star - Manual (Page 248)

248
Chapter 3 ETHERNET PARAMS
Job Control
• Standard (factory default). The NIC waits for the entire job to be received
before it indicates the job is done.
• Enhanced . The NIC waits for the entire job to be printed before it
indicates the job is done.
• Fast Standard . The EOJ (End of Job) packet is acknowledged
immediately. Use this option if the job is timed out due to a delay in the
acknowledgement of the EOJ packet because of the amount of data
being printed.
• Off . There is no synchronization between the NIC and the printer when
printing a job.
NOTE: For detailed information about using the NIC, refer to the Network
Interface Card User’s Manual .
Offline Process
• Disable (factory default). When set to disable, the printer does not
process network data while offline.
• Enable . When set to enable, the printer continues to process (but not
print) the current network/parallel job while the printer is offline until the
printer's buffer is full.