Printronix SL_T5R Energy Star - Manual (Page 219)

Emulation Submenus
219
SPC Space Supp
This option is only available in Coax SPC emulation and is used in LU3/DSC/
DSE mode only.
• Disable (factory default). Treats nulls and spaces normally.
• Enable . If the entire line consists of spaces and nulls, the line will be
discarded.
SPC Type (SPC Coax Setup)
• PTX NI (Printronix Non-impact) (factory default). This option causes the
printer to not line wrap at 132 characters.
• Avatar Comp . This option causes the printer to line wrap at 132
characters despite the current print density allowing more characters per
line.
SPC Type (SPC Twinax Setup)
Allows you to select a convertor which mimics a specific type of external
protocol convertor:
• MODE PTX NI (factory default) for Printronix non-impact
• MODE 219 for Model 219 protocol convertor
• MODE P5000 for Printronix protocol convertor
• MODE IBM for the IBM protocol convertor
Standard Sets
This item allows you to select various character sets available from the
“Character Group” item.
The options are Standard, Arabic, Cyrillic, European, Greek, Hebrew, and
Turkish Sets.
The factory default is Standard Sets.
Text Length
Text Length is the printable length on the page below the top margin.
The range is 1-255, and the factory default is 66.
Text Position
Specifies where the text will be positioned in the line space.
• Top of Line . Text is positioned at the top of the line space.