Printronix SL_T5R Energy Star - Manual (Page 63)

Running Media Profile
63
Figure 1. Media Profile Printout
Gap Sensing
This figure shows a Media Profile printout of a smart label where Gap/Mark
Sensor is set to Gap in the CALIBRATE CTRL menu.
In this example, the gap threshold value the printer selected (represented by
the Gap/Mark dotted line) is too close to the amplitude of the antenna pulse.
This may cause the printer to falsely use the antenna as the gap (top-of-form).
183412a
1023
0767
0511
0255
0000
Paper Out (578)
Gap Mark (421)
FEED
183413a
1023
0767
0255
0000
Gap(209)
Detected Amplitude
of the Antenna
Detected Amplitude
of the Gap
Media Sensor
Position
Indicates Type of Gap/Mark
Sensing Selected
Paper Out(441)
0511