Printronix SL_T5R Energy Star - Manual (Page 194)

194
Chapter 3 EPSON FX SETUP
Compressed Print
Controls which host command sets compressed printing.
• Char 01 SOH (factory default)
• Char 03 ETX
• Char 09 HT
Control Code 06
Control Code 06 defines the function of ASCII code 06 hex (ACK). You can
select an alternate line spacing of 6.0, 8.0, or 10.3 LPI.
The options factory default is 8.0 LPI.
Control Code 08
Control Code 08 defines the function of ASCII code 08 hex (BS). You can
define the code to output an Elongated character or a Backspace. The factory
default is Elongated.
Copy Count
Determines the number of identical copies of each physical page that will be
printed.
The range is 1-999, and the factory default is 1.
CR at MPP+1
MPP is Maximum Print Position, which is also known as line length. This
option controls a carriage return at the end of a print line and at MPP+1.
• On (factory default). Produces a carriage return to the first print position of
the next line.
• Off . Produces a carriage return to the first print position of the current line.
CR Edit
This parameter determines if a carriage return will be followed by a line feed.
• Disable (factory default). The printer ignores all carriage returns that are
not followed by line feeds.
• Enable . The printer processes all carriage returns, even for those that are
not followed by line feeds.