Printronix SL_T5R Energy Star - Manual (Page 225)

Emulation Submenus
225
XOH-SMO Support
This option allows the user to disable reporting of XOH-SMO support in the
STM reply.
This feature has been added because some hosts will not send an IPDS
XOH-SMS to a printer that reports it is a Continuous Forms printer, and also
supports XOH-SMO.
• Enable (factory default). The printer reports that it has support for XOH-
SMO.
• Disable . The printer does not report that it has support for XOH-SMO.
DIAGNOSTICS
DIAGNOSTICS
(from page 91)
Printer Tests
Auto Calibrate*
Checkerboard
Grey
Grid
Current Config
Left Test
Right Test
Combo Test
Ethernet Test
Barcode Demo
Novram Err Log
ODV/RFID Report 1
Test Count
Continuous*
1 Page
2 Pages
5 Pages
10 Pages
Print Error
Log
Software
Build
XXXXXX Ver. XX X
2
Feature
File
4
Hex Dump
Mode
Disable*
Enable
Clear Error
Log
FLASH
Installed
XX Megabytes 2
DRAM
Installed
Ptr On Time
XXX.X Hours
2
Ptr Media
Dist
XXXXX inches 2
Head Print
Dist
XXXXX inches 2
Head On
Time
XX.X Hours 2
Reset Head
Data
Head Type
XXX DPI 2
XXXXXX- XXX
2
XX Megabytes 2
* = Factory Default
1
Appears only if the validator and/or RFID encoder is installed.
2 You cannot change this value; it is a display only item.
3 The menu appears only if a feature file has been downloaded to the printer.
Auto
Dump
Disable*
Enable