Printronix SL_T5R Energy Star - Manual (Page 43)

Batch Rewind Mode
43
Using the Optional Internal Rewinder
The printer can be set up to rewind labels after they have been printed (Batch
Rewind Mode) or to automatically peel labels from their backing and dispense
them one at a time while rewinding the liner (Peel-Off Mode). Both modes
require an internal rewinder, which is available as a factory installed or a field
unit option.
Batch Rewind Mode
Batch Rewind allows you to automatically rewind printed labels into a roll
using the optional internal rewinder.
Configuring the Printer Menu
1. Set Media Handling to “Continuous” under the QUICK SETUP menu.
(See Chapter 3, “Configuring The Printer” for more information.)
2. Press the PAUSE key until “OFFLINE” displays.
Installing the Paper Path
The paper path must be installed when using Batch Rewind mode.
To install the paper path:
1. Open the front door by pulling it upwards, then forward.
183397a
Paper
Path
Groove
Hook
Front Door