Printronix SL_T5R Energy Star - Manual (Page 51)

Removing the Paper Path
51
Removing Label Liner from the Rewinder
1. Open the media cover.
2. Open the front door.
3. Tear the liner at the tear bar.
4. Manually rewind the remaining liner onto the rewinder by turning the
rewinder counterclockwise.
5. Turn the release lever on the rewinder clockwise.
6. Slide the roll of label liner off the rewinder and discard.
Removing the Paper Path
Remove the paper path from the front door when using Tear-Off or Tear-Off
Strip media handling, because you will need to tear the label downward
against the tear bar.
1. Open the front door by pulling it upward, then forward.
2. Grasp the upper right corner of the paper path and pry it off of the top of
the front door.
3. After removing the paper path, close the front door.
4. Open the pivoting deck and load paper and ribbon normally (see “Loading
Media and Ribbon” on page 28).
183405a
Paper
Path
Groove
Hook
Front Door
Tear Bar