Printronix SL_T5R Energy Star - Manual (Page 81)

Printing a Configuration
81
Printing a Configuration
We recommend that you print and store your configurations for future
reference. The printout provides a list of the parameters that were set when
you configured the printer.
To print a configuration:
1. Press the key until the following message displays:
2. Press the
↓ key until the following message displays:
3. Press the + or − key to cycle through the following printout options:
Current*
Factory
Power-Up
All
1-8 customized configurations
4. When the desired option displays, press the ↵ key. The printer prints the
specified configuration.
NOTE: If the configuration you want to print has not been saved, the
following message displays momentarily:
This message indicates that no configuration menu has been saved
under the configuration value you have selected and therefore cannot
be printed. You must either select another configuration to print or
load and then save a configuration to that configuration value first.
Loading A Saved Configuration
To use a different configuration:
1. Press the PAUSE key until OFFLINE displays.
2. Press the JOB SELECT key until the desired configuration displays.
3. Press ↵. Loading Saved/Configuration displays.
..
.
MENU MODE
CONFIG. CONTROL
Print Config.
Current*
CONFIG. DOES NOT
EXIST/Save First