Specifying a power-up configuration – Printronix SL_T5R Energy Star User Manual
Page 78
78
Chapter
3
Overview
Specifying a Power-Up Configuration
You can specify any one of the nine configurations (1-8 or Factory) as the
power-up configuration:
1.
Press the
key until the following message displays:
2.
Press the
↓ key until the following message displays:
3.
Press the
+
or
−
key to cycle through the options (1-8 and Factory). When
the desired number displays, press the
↵ key to select it. The following
message displays:
NOTE:
If the configuration number has not been saved previously, the
following error message displays:
If this error message displays, see “Saving a Configuration” on
page 76. Once you have saved a configuration, repeat the steps in
this procedure.
..
.
MENU MODE
CONFIG. CONTROL
Power-Up Config.
1*
Power-Up Config.
X
*
CONFIG. DOES NOT
EXIST/Save First