Printronix SL_T5R Energy Star - Manual (Page 243)

ETHERNET PORT Submenu
243
ETHERNET PORT
ETHERNET PORT Submenu
Timeout
This item allows you to set the time that the printer, when it has not received
data from its host, will begin to service all other host ports looking for data to
print.
The range is from 1 to 60 seconds, and the factory default is 10 seconds.
Switch Out On
• Data Timeout (factory default). Allows Autoswitching when no data has
been received for the selected Time Out period.
• Session Close . Allows Autoswitching only when the Network Socket is
closed.
ETHERNET
PORT
(from page 92)
Timeout
10 sec.*
1-60 sec.
Switch
Out On
Data Timeout*
Session Close
Notes:
* = Factory Default