Alpha Technologies AMPS80 HP - Manual (Page 35)

33 Doc. #: 026-069-B0 Rev F
Use Phillips head
tool to remove
4.5 Unpacking Instructions
1. Remove 6 screws from top panel to
access AMPS80 HP lifting eyes.
2. Remove 4 screws from each top 2 x 4
and 6 screws from each wooden side
piece to gain access to removal of the
front and rear wooden frames.
Use Phillips head
tool to remove
3. Remove 3 screws from the front
and rear wooden frames. 4. Remove AMPS80 HP metal side panels to gain
access to 4 interior lag bolts. Remove 4 lag bolts to
allow removal of the AMPS80 HP from the pallet.
Use Phillips head
tool to remove
Lifting eyes
A
Use 9/16" wrench or
socket to remove
WARNING!
The AMPS80 HP rack weighs 270 kg / 595 lb. Care must be taken to ensure that it does not
topple over.