Alpha Technologies AMPS80 HP - Manual (Page 60)

Doc. #: 026-069-B0 Rev F 58
6.3 Using the CXC Unified System Controller
The CXC controls the AMPS80 HP system and allows the user to set wide variety of parameters regarding the
alarms and operational functionality of the rectifier and inverter modules.
The following guide provides a brief overview of the controller; in-depth information can be found in the Tech-
nical Manual for the Cordex Controller Software.
6.3.1 Software Overview
The CXC software enables control of an entire DC + AC power system via the CXC central touch screen user
interface or web based monitoring and control interface. The software also allows the user to control temper-
ature compensation, auto equalization, remote access, and battery diagnostics.
Figure 38 —
CXC system controller
User interface
Located on the front panel of each model is a 160-x-160-pixel touch screen liquid crystal display. This graphi-
cal user interface (GUI) enables a person to interact with screen selectable items.
LED lights
Each CXC has three LEDs located on the front panel. These are used to display the alarm status of the power
system, CXC progress and status during startup, and file transfers.
Alarm conditions
The CXC illuminates the LED that corresponds to the system alarm status. The following show the corre-
sponding alarm status for each LED color:
• Green – OK, no alarms present.
• Yellow – Minor alarm is present (no major alarms).
• Red – Major alarm is present.
• Only one LED is illuminated at a time during alarm conditions.