Alpha Technologies AMPS80 HP User Manual
Page 38
Advertising
![background image](/manuals/317354/38/background.png)
Doc. #: 026-069-B0 Rev F
36
STEP 2: Locate the
rectifier terminal block
STEP 1: Remove the
wiring access panel.
WARNING!
Before removing the wiring access panel, make sure all power to the unit is switched off,
tagged and locked.
Figure 16 —
Rectifier terminal block
Procedure to remove the internal rectifier powering wiring:
Have the following tools on hand:
• Phillips screw driver
• 3/8” wrench or socket
• 3/16” hex key
Advertising