Alpha Technologies AMPS80 HP - Manual (Page 58)

Doc. #: 026-069-B0 Rev F 56
< 5%
Flashing
5% to 40%
On steady
40% to 70%
On steady
80% to 95%
On steady
100%
On steady
100% Overload
Flashing
Output Power (redundancy not counted)
The output power LEDs (located on the right side of the module’s front panel indicate the amount of power
(percentage of rated power) provided by the module. The number of bars that are illuminated combined with
whether or not they are on steady or flashing indicate the output power level or overload condition as shown
in the figure below.
Figure 36 —
Output power indicator LEDs