Glossary – Hach-Lange SI794 C User Manual User Manual
Page 111
Advertising
111
Glossary
Conductivity
Conductivity
χ
[S/cm] = G [S] · c [1/cm]
Conductivity
sensor
Either 2- or 4-electrode sensors can be
connected. The cell constant of the sensor in
use must be entered or be determined using
a calibration solution taking account of the
temperature.
A special device variant (si794 I) is provided
for electrodeless sensors.
Conductance G [S] = 1 / R [Ω]
Conductance
Temperature
coefficient
With temperature compensation activated,
the measured value is calculated to the value
at the reference temperature (25 °C) using the
temperature coefficient.
Temperature
compensation
Calculates the measured conductivity value for
a reference temperature.
Advertising