Hach-Lange SI794 C User Manual - Manual (Page 59)

Code Display Action Choices
L2 . Hi
(Lo)
For limit 2 function principle,
see Fig. below. Select using 4
key. Press enter to proceed.
Limit 2 contact response
N/O: normally open contact
N/C: normally closed contact
Select using 4 key.
Press enter to proceed.
N/O
(N/O
N/C)
Limit 2 setpoint
Select position using 4key, edit
number using 5 key. Press enter to
proceed.
100 .0 mS
(xxxx mS)
Limit 2 hysteresis
Select position using 4key, edit
number using 5 key. Press enter to
proceed.
001 .0 mS
(xxxx mS)
Limit 2 delay
The contact is activated with
delay (deactivated without delay)
Select position using 4 key,
edit number using5 key.
Press enter to proceed.
0010 sec
(0 ...
9999 sec)
Limit Lo
Hysteresis +
Setpoint
Contact
0
1
Signal
Limit Hi
Hysteresis -
Signal
Setpoint
Contact
0
1
59