Hach-Lange SI794 C User Manual - Manual (Page 61)

61
001 .0 mS
(xxxx)
050 .0 mS
(xxxx)
Setpoint
Select using 4 key, edit number
using5 key. Press enter to proceed.
Neutral zone (dead band)
Select using 4 key, edit number
using5 key. Press enter to proceed.
Controller: P action
Select using 4 key, edit number
using5 key. Press enter to proceed.
Code Display Action Choices
Ct .
0100 %
(xxxx %)
Controller: I action (reset time)
Select using 4 key, edit number
using5 key. Press enter to proceed.
0000 sec
(xxxx sec)
Controller: D action (rate time)
Select using 4 key, edit number
using5 key. Press enter to proceed.
0000 sec
(xxxx sec)
Pulse length /Pulse frequency
Select using 4key.
Press enter to proceed.
PLC
(PFC)
PLC: Pulse length
Select using 4 key, edit number
using5 key. Press enter to proceed.
0010 sec
(xxxx sec)
PFC: Pulse frequency
Select using 4 key, edit number
using5 key. Press enter to proceed.
0060 /min
(xxxx /min)
Behavior during HOLD
Select using 4key.
Press enter to proceed.
Y Last
(Y Off/
Y Last)