Hach-Lange SI794 C User Manual - Manual (Page 120)

120
Index
Select process variable 34
Select pulse length / pulse frequency controller 60
Select Sensocheck 55
Select sensor 33
Select temperature compensation 52
Select temperature probe 46
Sensocheck 25, 92
Sensocheck, selection 54
Sensoface 25, 92
Sensor connection 18
Sensor type selection 32
Setpoint 60
Settings of relay 56
Signaling parameter set 1/2 64
Sodium chloride solution NaCl 106
Sodium chloride solutions 105
Sodium hydroxide solution NaOH 108
Specifications 98
Sulfuric acid H2SO4 109
Switching between parameter sets 66
T
Table of contents 3
Temp probe adjustment 80
Temperature coefficient 53
Temperature compensation 52
Temperature compensation for ultrapure water 53
Temperature error 50
Temperature probe selection 47
Temperature unit 46
Temperature/conductivity table as per USP 95
Terminal assignments 16
Terminals 17
Time constant of output filter (attenuation) 43