ZOLL R Series Monitor Defibrillator Rev K Operators Guide - Manual (Page 135)

Transferring Full Disclosure Files Through Wi-Fi (R Series Plus Only)
9650-0904-01 Rev. K ZOLL R Series Operator’s Guide 12–5
To transfer data through the USB port:
1. Turn the Mode Selector to ON.
2. Press the Manual Mode softkey.
Note: If the CONFIRM MANUAL MODE message displays, press the Confirm softkey to
enter the Manual mode of operation.
3. Press the Report Data softkey.
4. Press the Transfer Mode softkey.
5. Press the More softkey.
6. Press the Enable USB softkey.
The R Series is now in USB Transfer Mode.
7. Initiate data transfer using ZOLL CodeNet Central or RescueNet Code Review software.
To exit USB Transfer mode, press the Disable USB softkey or switch the Mode Selector to
OFF.
Transferring Full Disclosure Files Through Wi-Fi
(R Series Plus Only)
Before you begin, ensure the Wi-Fi card is properly seated with the name R Series Data
COMM or Data COMM II facing up in the compact flash slot. Make sure that the Wi-Fi guard
has been attached.
To transfer data through Wi-Fi:
1. Turn the Mode Selector to ON.
2. Press the Manual Mode softkey.
Note: If the CONFIRM MANUAL MODE message displays, press the Confirm softkey to
enter the Manual mode of operation.
3. Press the Report Data softkey.
4. Press the Transfer Mode softkey.
5. Press the Report to Wi-Fi softkey.
6. The Enter Report ID screen will appear, and you will be prompted to enter a unique report
ID. Use the arrow keys to select the desired characters, then press the Enter Char softkey.
Pressing the ... key will change the table to a different set of characters, including upper case
letters. To cancel and return to the previous screen, use the arrow keys and select Cancel.
Enter Report ID
m
y
n
z
o
0
;
p
1
,
q
2
@
r
:
3
.
s
4
+
t
5
_
u
... 6
v
7 8
w x
9
' " - ?
b c d e f g h i j k l Cancel
Del
Pat230
Enter
Char
Send
Report
a
DATA TRANSFER MODE