ZOLL R Series Monitor Defibrillator Rev K Operators Guide - Manual (Page 47)

Common Tasks
9650-0904-01 Rev. K ZOLL R Series Operator’s Guide 2–15
The right-most softkey is labeled MORE when there are more than six items on the code
marker list. Press the MORE softkey to see the next set of Code Markers displayed above the
softkeys.
Separate code marker lists are maintained for DEFIB and PACER modes, thereby enabling the
display of appropriate code markers for each particular protocol. (For information on
configuring these code marker lists, refer to the R Series Configuration Guide.)
The code markers are removed from the display after 10 seconds. If no Code Marker softkey
has been pressed during that time, a “default” event mark is stored in Summary Report
memory.