ZOLL R Series Monitor Defibrillator Rev K Operators Guide - Manual (Page 155)

9650-0904-01 Rev. K ZOLL R Series Operator’s Guide 14–1
Chapter 14
Troubleshooting
The troubleshooting information provided in this chapter is intended for use by nontechnical
medical personnel during device operation. This chapter answers many of the common
problems or questions that may arise during operation.
If trouble persists after consulting this guide, contact the appropriate technical personnel or
ZOLL Technical Service Department. Refer to the R Series Plus/BLS Service Manual for more
detailed troubleshooting information.
Code-Ready
Symptom Recommended Action
1. Code Readiness indicator displays
a red “X” while unit is turned off.
Turn the unit on. Print Code Readiness log as described on
page 13-7. Follow messages and prompts to resolve the
problem.
2. Code Readiness indicator displays
a red “X” while unit is powered on.
Turn the unit off and then on again. Follow messages and
prompts to resolve the problem.
Perform a Manual Defibrillator test as described in “Manual
Defibrillator Testing” on page 13-3.
If the unit continues to fail, take it out of service and contact
ZOLL Technical Service.