Yokogawa Data Acquisition with PID Control CX2000 - Manual (Page 118)

6-3
M-4659
Configuring the MV1000/MV2000
1
2
3
4
5
6
7
8
Index
6.2 Setting and Checking the System Configuration
and Initializing Settup Data
Changing/Checking the System Configuration
You can create new hardware configuration files, or open existing configuration files
and then check the system configuration or change the configuration according to the
specifications of the connected RD-MV1000/RD-MV2000.
Normally, a system is set up according to the specifications of the RD-MV1000/RD-
MV2000 to be set up.
1. Choose [System] - [System Configuration] from the menu bar.
The [System Configuration] dialog box opens.
Click the [MVAdvanced] tab.
2. Change the various settings according to the RD-MV1000/RD-MV2000 that you
will connect to (blue and brown items are selected, gray items are cleared).
The settings in the Option group differ depending on the model and options of the
instrument.
For example, for the RD-MV1000, or for the RD-MV2000 with eight channels or
fewer, the external function item cannot be selected. If [Pulse] is selected (blue),
the [Math] and [Remote] items are disabled.
3. After changing the configuration and clicking the [OK] button, the message,
“System configuration has been changed.
The input configuration and data will be initialized. Continue?” appears.
4. Click the [OK] button to initialize the data.