Deleting marks, Resetting marks – Yokogawa Data Acquisition with PID Control CX2000 User Manual
Page 88
Advertising
4-16
M-4659
Deleting Marks
1. Place Cursor A and Cursor B so that
the mark is between the two.
2. Select [Edit] - [Delete Mark].
The arbitrary marks (green/yellow) and trigger marks (yellow) between Cursor A and
Cursor B are deleted.
Note
• The arbitrary marks placed on the Data Viewer are green. The arbitrary marks (messages)
and trigger points placed on the recorder are yellow.
• Up to 32 characters can be used for a mark name.
Resetting Marks
All arbitrary marks created on the Data Viewer are erased by selecting [Edit] - [Reset
Mark]. The marks (messages) and the trigger point that were created on the recorder but
deleted on the Data Viewer are displayed again.
4.2 Displaying the Waveform
Advertising
This manual is related to the following products: