Yokogawa Data Acquisition with PID Control CX2000 - Manual (Page 233)

7-59
M-4659
1
2
3
4
5
6
7
8
Index
Configuring the CX1000/CX2000
Display Span
Set the upper and lower limits of the display.
The range is –9999999 to 99999999. Set the number of decimals to four digits or less.
Alarm and Tag
The settings are the same as those of the measurement channels. For details, see
section 7.8, “Measurement Channels Settings”.
TLOG Computation
Timer
Select one of the timers (1 to 3) set in the setup mode.
The computation interval of TLOG computation is set to the time assigned to the selected
timer.
Sum Scale
Set the sum scale.
Rolling Average
Rolling Average Computation ON/OFF
Select whether to compute the rolling average.
Interval
Select the sampling interval when rolling average is activated.
Times (Number of Samples)
Select the number of samples (number of data points used to compute the rolling
average).
Zone, Graph, Partial, and Color
The setting method is the same as that of the measurement channels. For details, see
section 7.8, “Measurement Channels Settings.”
Constants
You can set constants to be used in the expression. Up to 12 constants (CX1000) or up
tp 30 constants (CX2000) can be specified.
7.9 Computation Channel Settings