Yokogawa Data Acquisition with PID Control CX2000 - Manual (Page 98)

4-26
M-4659
Note
If you drag on the “Alarm List” display screen, a pointer is displayed. The cursor on the
waveform display, circular display, numerical display, and cursor value display are not
synchronized to this pointer.
Converting and Saving an Alarm List, Mark List, or Control Mode List
An alarm list, mark list, or control mode list can be converted to Excel, ASCII, and Lotus
formats.
1. Click here([Convert]-[Alarm to] or [Mark to])
2. The [Alarm List] or [Mark List] dialog box opens.
3. Click here.
6. Click here.
4. The [Save As] dialog box opens.
Enter the file name.
Select one.
5. Set the items and
click here.
4.6 Listing Alarms, Marks, and Control Modes, and Converting the List