Yokogawa Data Acquisition with PID Control CX2000 User Manual
Page 134
6-19
M-4659
Configuring the MV1000/MV2000
1
2
3
4
5
6
7
8
Index
Use
Turn On the groups you want to use.
Group name
Set the group name. (up to 16 characters)
Channel Configuration
Set up to 10 channels (RD-MV2000) or 6 channels (RD-MV1000) from measurement
channels, computation channels (/M1 and /PM1 options), and external input channels (/
MC1 option, RD-MV2000).
Note
• The trend, digital, and bar graph displays are shown in the specified order.
• A channel can be assigned to multiple groups.
• The same channel cannot be assigned multiple times in a group.
Trip line
Set lines at specified positions in the waveform display range on the Trend display.
• Use
Turn [ON] the trip lines you want to display.
• Position
Set the position in the range of 0 to 100% of the display width.
• Color
The default colors are red, green, blue, and yellow. If you want to change the color,
select from the 24 available colors.
• Trend Line
Set the line width of the trip line in dots (1 to 3).
Display
6.5 Entering General Settings