Yokogawa Data Acquisition with PID Control CX2000 - Manual (Page 216)

7-42
M-4659
PV Event-Relay output/Time Event-Relay output/Program pattern end
signal
Relay Output
Turn OFF/ON the relay output.
Number
Select the number of the relay output terminal from the following.
DO001 to 006, DO101 to 106, DO201 to 206, RO001 to 012 only (on models with the
expansion DIO terminal block), SW001 to SW036 (internal switches, Style3 or later).
Action
Displays the relay output action (Energized/De-Energize) per the [Control Relay] settings
on the [Setup] tab.
Event Display Group
You can select events for when groups are displayed in the CX program selection screen
or program operation screen. Up to 5 events can be specified.
ON/OFF
Turns the display ON or OFF.
Kind
Select either time event or PV event.
Number
Set the event number.
7.6 Program Control Related Setup Operations