Yokogawa Data Acquisition with PID Control CX2000 - Manual (Page 17)

3-1
M-4659
Configuring the DX1000/DX2000
1
2
3
4
5
6
7
8
Index
3.1 Starting the Hardware Configurator
The Hardware Configurator can transmit and receive the setup data, change the setup
data, and create new setup data. The setting screen may differ from your actual
screen.
Starting the Hardware Configurator
1. Click the [CONFIG] button in the Launcher window.
The setting screen in displayed. The DX2000 setting screen appears by default.
To Load Setup Data from the DX1000/DX2000
Before performing the following procedure, please make sure that the communication
method and parameters are correct. (For details, see section 2.3, “Setting the
Communication Method.”)
1. Click the [Receive Data] button, or choose [Comm.] - [Receive Setting] from the
menu bar.
The [Receive Data] dialog box opens.
2. Click the [OK] button.
Receiving starts.
Chapter 3 Configuring the DX1000/DX2000