Yokogawa Data Acquisition with PID Control CX2000 - Manual (Page 154)

6-39
M-4659
Configuring the MV1000/MV2000
1
2
3
4
5
6
7
8
Index
User Registration
You can set the [User Registration] when [Login] is selected as [Key Security] or [Comm.
Security] under [Environment] - [Detail Setting] in the [Basic Setting] tab.
Supervisor
• Auto Logout Time
Settings Description
OFF Does not log out until the logout operation is executed.
1min to 10min Automatically logs out when there is no key operation for a specified time.
• Logout Operation
Settings Description
OFF Only login operation is available.
Logout Operation
Display Allows the user to switch the operation screen in addition to the login
operation.
• Mode
The choices differ depending on the selected contents of [Key Security] and [Comm.
Security] under [Environment] - [Detail Setting] in the [Basic Setting] tab.
Settings Description
OFF Not register.
Key Log into the RD-MV1000/RD-MV2000 using keys.
Comm Log into the RD-MV1000/RD-MV2000 via communications.
Web Log into the operator page and monitor page of the RD-MV1000/RD-
MV2000 using a Web browser.
Key+Comm Log into the RD-MV1000/RD-MV2000 using keys and via
communications.
• User Name
Set the user name. (Up to 20 characters)
• You cannot register user names that are already registered.
• You cannot register “quit” or a user name containing all spaces.
• Password
Set the password. (Up to 8 characters)
An entered password is displayed as “********.”
• You cannot register “quit” or a password containing all spaces.
6.6 Entering Basic Settings