Yokogawa Data Acquisition with PID Control CX2000 - Manual (Page 14)

2-1
M-4659
Functions of Launcher
1
2
3
4
5
6
7
8
Index
Chapter 2 Functions of Launcher
2.1 Functions of Launcher
The utilities of the DAQSTANDARD can be started from Launcher.
Starting
From the Start menu, select [Programs] - [DAQSTANDARD] - [Launcher].
Launcher starts, and the following window appears. If communications have not been
set, the [Network] dialog box appears. Hardware Configurator (CONFIG), Data Viewer
(VIEWER) and [Network] dialog box (NETWORK) can be started from Launcher.
Description of Each Button
The following three tool buttons are available.
CONFIG Hardware Configurator Start button. Used to start Hardware Configurator.
Once Hardware Configurator has started, this button will be disabled.
VIEWER Data Viewer Start button. Used to start Data Viewer. Once Data Viewer has
started, this button will be disabled.
NETWORK [Network] Dialog Box Display button. Used to open the [Network] dialog box
to set communication conditions. Once Hardware Configurator has started,
this button will be disabled.
Description of Each Menu
The following two menus are available.
Launcher Hardware Configurator Same as the CONFIG button
Data Viewer Same as the VIEWER button
Network Configuration Same as the NETWORK button
Help About Displays the version number of Launcher.