Yokogawa Data Acquisition with PID Control CX2000 - Manual (Page 42)

3-26
M-4659
File
Directory name
Set the name of the directory on the storage medium for saving the data on the external
storage medium. (Up to 20 characters)
Symbols that can be used: #, %, (, ), +, -, ., @, °, and _.
Strings that cannot be used: AUX, CON, PRN, NUL, CLOCK, COM1 to COM9, and LPT1
to LPT9.
Header
Set the header comment to be written to the data file. (Up to 50 characters)
Structure
Sets the structure of the file name when saving data.
Settings Description
Date Serial number + user-assigned character string + date
Serial Serial number + user-assigned character string
Batch Serial number + batch name (when using the batch function)
File name
Set the user-assigned section of the file name. (Up to 16 characters)
Symbols that can be used: #, %, (, ), +, -, ., @, °, and _.
Field Title, Field Characters
Set the string.
Title of field: Up to 20 characters, Characters: Up to 30 characters
Event Data
Event related settings are enabled when [Data Kind] is set to [E+D] or [Event] in [Basic
Environment] under [Environment] in the [Basic Setting] tab.
Sample rate
Select the data recording interval from the available settings. See the description for “Data
length” on the next page. You cannot specify a sampling rate that is faster than the scan
interval.
Mode
Settings Description
Free Records data continuously.
Single Records data when the trigger condition is met.
Repeat Records data each time the trigger condition is met.
3.5 Entering General Settings