Yokogawa Data Acquisition with PID Control CX2000 User Manual
Page 177
7-3
M-4659
1
2
3
4
5
6
7
8
Index
Configuring the CX1000/CX2000
7.1 Starting the Hardware Configurator, the Hardware Configurator Window, and System Configuration Settings
Creating Setup Data by Configuring a New System
2. The [System Configuration] dialog box opens.
Click the [CX] tab.
1. Click the [New] button or
select [New] on the [File] menu.
3. Select the appropriate items
and click the [OK] button to
return to the Hardware
Configurator window.
New file
For details about the settings in the [System Configuration] dialog box, see section 7.2
“Setting and Checking the System Configuration and Initializing Setup Data”.
Note
In the procedure for the [System Configuration] dialog box, make sure that the CX tab is
selected before entering settings. If the tab other than CX is selected, the settings you enter
will apply only to those instruments.