Yokogawa Data Acquisition with PID Control CX2000 - Manual (Page 243)

7-69
M-4659
1
2
3
4
5
6
7
8
Index
Configuring the CX1000/CX2000
7.11 Network Settings
Web Server Settings
When using Ethernet communications, the CX can be set up as a web server. Set Web
Server to [ON], and then set the access certification and other settings for the operator
page and monitor page.
Click this tab
E-mail Transmission Settings
When using e-mail transmission, specify [SMTP server name], [Port number],
[Recipient1], and other settings. The e-mail transmission function can be used only with
Ethernet communications. For details about the settings, refer to the CX1000/CX2000
Communication Interface User’s Manual (IM 04L31A01-17E).
Click this tab
By clicking the [Alarm], [Scheduled], [System], or [Report] tab, you can make settings
separately for each type of e-mail message.