Yokogawa Data Acquisition with PID Control CX2000 - Manual (Page 269)

8-19
M-4659
1
2
3
4
5
6
7
8
Index
Configuring the DX100/DX200/DX200C/MV100/MV200
8.5 Configuring the Setup Mode
Key Lock/Login
Click here (also selectable from [Setting] - [SETUP [Basic] Setting]-[Setting])
Check when using login, auto logout, and user ID.
Turn ON when using user settings
Setting the key lock
• Key Lock
When using the key lock function, select whether or not to activate the key lock
function (lock or free).
• Password
Enter the password used to release the key lock using up to six characters. [???] is
displayed after the password is entered.
Setting the login
• User name
Up to 16 characters can be entered for the user name.
• User ID
Up to 4 characters can be entered for the User ID. [???] is displayed after the
password is entered.
• Password
Up to 6 characters can be entered for the password. [???] is displayed after the
password is entered.
• Setup
Select whether or not to allow setting changes in the setup mode.
Note
• If there is a duplicate [User Name] that is turned ON, the user with the larger user number is
turned OFF.
• If [Setup] of all users that are turned ON is set to [Disable], the [Setup] of the user with the
smallest number is set to [Enable].