Yokogawa Data Acquisition with PID Control CX2000 - Manual (Page 43)

3-27
M-4659
Configuring the DX1000/DX2000
1
2
3
4
5
6
7
8
Index
Data length
Select the size of a record data file. The recorded data is divided by the file size
specified here. The available data lengths vary depending on the Sample rate setting.
Sample rate
Selectable range
of data length
Sample rate
Selectable range
of data length
Sample rate
Selectable range
of data length
* Selectable on the DX1002, DX1002N, DX1004, DX1004N, DX2004 and DX2008
25 ms* 25 ms 250 ms 500 ms 1 s
10 min to 10 min to 10 min to 10 min to 10 min to
4 hours 1 day 2 days 3 days 7 days
2 s 5 s 10 s 30 s 1 min
10 min to 10 min to 10 min to 1 hour to 1 hour to
14 days 31 days 31 days 31 days 31 days
2 min 5 min 10 min
1 hour to 1 hour to 1 hour to
31 days 31 days 31 days
Pre-Trigger
Specify the range when recording data before the trigger condition is met. Select the
range as a percentage of the data length from 0, 5, 25, 50, 75, 95, and 100%. If you do
not want to record the data existing before the trigger condition is met, select 0%.
Trigger Signal Key
Select [ON] if you want to activate the trigger using key operation.
Custom Menu
Menu
The display selection menu appears when the DISP/ENTER key is pressed.
Delete selected items
Add an item beneath the selected item
Click to display a sub menu on the right side of the screen
Sub menu
Click to select
Type of main menus being set
Changes the left/right display area
Function
The FUNC key menu appears when the FUNC key is pressed.
3.5 Entering General Settings