Yokogawa Data Acquisition with PID Control CX2000 - Manual (Page 62)

3-46
M-4659
Scheduled
Specify the settings for sending e-mail at scheduled times.
• Recipient1 and Recipient2
Set the e-mail recipients. For Recipient1 and Recipient2, select [ON] to send e-mail
or [OFF] to not send e-mail.
• Interval
Select the interval for sending e-mail to Recipient1 and Recipient2 from 1, 2, 3, 4, 6, 8,
12, and 24 hours.
• Ref. time
Enter the time used as a reference for sending the e-mail at the specified interval to
Recipient1 and Recipient2.
• Include INST, Include source URL, Subject, and Header
These items are the same as the e-mail that is sent when an alarm occurs. The
default subject is Periodic_data.
System
Specify the settings for sending e-mail when the DX recovers from a power failure, at
memory end, and when an error occurs.
• Recipient1 and Recipient2
Set the e-mail recipients. For Recipient1 and Recipient2, select [ON] to send e-mail
or [OFF] to not send e-mail.
• Include source URL, Subject, and Header
These items are the same as the e-mail that is sent when an alarm occurs. The
default subject is System_warning.
3.6 Entering Basic Settings