HP 9100c Digital Sender series - Manual (Page 10)

8 Chapter 1 - Getting started EN
Coexistence with an HP Network ScanJet 5
scanner
The HP 9100C Digital Sender and the HP Network ScanJet 5
scanner coexist on the same network without conflict. Documents
sent to your computer from the HP Network ScanJet 5 scanner are
routed using the HP ScanJet Utility, and you can continue to use the
PaperPort™ software for HP to manage the scanned documents.
Documents sent to your computer from the HP 9100C Digital Sender
are routed using the HP Digital Sender Link.
If you would like, you can use just use one program on your computer
to manage scanned documents. Specify the target program as the
Preferred Inbox for the HP Network ScanJet 5 scanner and set the file
type to .pdf (if available) or multipage .tif. (See the documentation for
the HP Network ScanJet 5 scanner to set these options.) Documents
are still routed using the HP ScanJet Utility, but they appear in the
target program.
System requirements
To install and use the four included programs and the online
documentation, your computer needs the following:

a Pentium ® processor

Microsoft ® Windows 9x, or Windows NT 4.0 or 5.0 (Intel PC)

For Windows 9x: 16 MB RAM minimum, 32 MB RAM
recommended.
For Windows NT 4.0 or 5.0: 32 MB RAM minimum, 64 MB RAM
recommended.

a VGA monitor

41 MB of free hard disk space