HP 9100c Digital Sender series - Manual (Page 118)

116 Chapter 5 - Troubleshooting EN
Network access failure. There is a problem connecting
to the digital sender through
the network.
Close the ABM and then
start it again.

Turn the computer off and
then back on.

Turn the digital sender off
and then back on.

If the problem persists,
contact the administrator.
No items have been selected. During the procedure to import
e-mail addresses, you did not
select an address before
clicking Add. Select an address and then
click Add.
No matching entries were
found. During the procedure to import
e-mail addresses, no entries
matching the search criteria
were found in the specified
directory.
In the Directory search
dialog box, make sure the
correct directory is specified
and all fields are filled
correctly.

Make sure the directory you
are searching has been
defined. See “To define
directories” on page 58.
Search failed!
No such object. During the procedure to import
e-mail addresses, the
directory configuration might
not be correctly specified. In the directory configuration,
make sure all fields are filled
correctly. See “To define
directories” on page 58.
The password and the
confirmation text does not
match. Please enter them
again. During the procedure to import
e-mail addresses, the
password for the server that
was specified in the Password
and Confirmation fields did
not match. In the directory configuration,
retype the password in both
fields. See “To define
directories” on page 58.
The port number you have
entered is wrong. Please type
in a different value. During the procedure to import
e-mail addresses, you entered
an incorrect port number for
the server containing the
directory to be searched.
In the directory
configuration, check the
port number. See “To define
directories” on page 58.

If the problem persists,
check the port number with
the administrator.
HP Address Book Manager messages (continued)
Message Description Actions