HP LaserJet 9040.9050 Multifunction Printer series User Manual
Page 114
110 Chapter 9 MFP maintenance
ENWW
6
Close the front cover, reconnect all cables, and turn the MFP on (button in).
To clean the outside of the MFP
●
Clean the outside of the MFP if it is visibly marked.
●
Use a soft, lint-free cloth dampened with water, or water and a mild detergent.
To clean the touch screen
●
Clean the touch screen when needed (fingerprints, dust build-up).
●
Wipe the touch screen gently with a clean, water-dampened, lint-free cloth.
CAUTION
Use water only. Solvents or cleaners can damage the touch screen. Do not pour or spray water
directly onto the touch screen.
To clean the glass
●
Clean the glass only if dirt is visible, or if you are experiencing a decrease in copy quality,
such as streaking.
●
Clean the glass surface by wiping it gently with a clean, slightly damp, lint-free cloth. Use an
ammonia-based surface cleaner to dampen the cloth.
CAUTION
Do not pour or spray liquids directly onto the glass.
Do not press hard on the glass surface. (You could break the glass).